3D design on request

Yannic Fréson 3D, a 3D printing service for the Heist-op-den-Berg area in Belgium, designs new parts from a sketch and the dimensions that matter, such as brackets, holders, adapters, mounts and organisers, then prints them. Design work costs €60 per hour, billed per 15 minutes, 15 minutes minimum. Once you approve the design, the print is ready in 3 to 5 working days.

Angular card case with a Charcoal lid, an Ivory White base and a red line between them

What you get

  • A model drawn to be printed

    Wall thicknesses, fillets and the direction of the layers are part of the drawing. A design that only works on screen is a picture, not a part.

  • Clear terms on previews

    The quote states whether you see the model with its dimensions before the printer starts. Changes are charged per fifteen minutes.

  • Design and print from one source

    Whoever draws it knows what the printer can do. Nothing has to go back and forth between a designer and a print shop.

From sketch to 3D model

A made-to-measure design takes four steps. The first is the most important and the least effort for you.

  1. You say what it has to do

    A sketch with the dimensions that matter, and a few words on what the part has to hold or carry. Say what it has to fit into or onto as well.

  2. You get an estimate

    The quote states the estimated number of quarter-hours of design and the price of the print. You know where you stand before anything starts.

  3. Drawn, then checked by you

    The model is built in CAD at the right size. The quote states whether you get a preview to approve and how many rounds of changes are included.

  4. Printing

    After your approval the part is printed in the material and colour that suit its use.

Detail of the lid with white sliders, the battery icon and the red-edged wedge

A designer's eye, even for a bracket

Function comes first: it has to fit and stay put. Then comes the question of what it looks like, and that need not cost anything extra. A chamfer in the right place or a second colour in a single line turns a fixture into something you do not hide in a drawer. On this card case the relief is in the design, not on a sticker.

See how the Card Case was designed

What design work costs per hour

Design work at Yannic Fréson 3D costs €60 per hour. It is billed per quarter-hour started, with a minimum of 15 minutes per job. Drawing a simple cap, spacer or wall hook usually takes half an hour. The design cost is listed separately on the quote, next to the price of the print itself.

How long a design takes depends less on its size than on the number of dimensions that have to be right. A box with a lid that clicks shut is more work than a box with a lid that rests on top. An organic shape is more work than a rectangle.

The estimate in your quote is an estimate. If it threatens to run over, you hear about it before it does. Design costs fall outside the quantity discount: drawing does not go faster because you order fifty. The model does only have to be drawn once.

All rates are on the page with prices for printing and design.

Good to know

Yannic Fréson 3D designs new technical and decorative parts that fit an FDM printer of 256 × 256 × 256 mm. The starting point is your sketch with the dimensions that matter. There is no 3D scanning, and faces, figures and free-form sculpture are not on offer.

Rate
€60 per hour, per 15 minutes, 15 minutes minimum.
What is enough
A sketch with the dimensions that matter and a few words on what the part has to do.
No scanner
No 3D scanning. Every model is drawn in CAD from your sketch and dimensions.
No sculpture
No portraits, figurines or free-form sculpture.
Maximum size
256 × 256 × 256 mm per piece. Larger designs are drawn in sections.
Protected work
No logos or characters of brands you do not hold the rights to.

Examples with and without design

At Yannic Fréson 3D the price of a made-to-measure job has two parts: design at €60 per hour and the print itself, from €10. Two examples of prints that often start with some drawing.

  • Enclosure with lid for electronics

    Dimensions
    120 × 80 × 45 mm
    Material
    PETG, 1 colour
    Print time
    approx. 7 h 30 min

    from

    €29

    Indicative price. Final price, VAT not applicable. Your quote is exact.

  • Two-colour name sign

    Dimensions
    200 × 120 × 5 mm
    Material
    Matte PLA, 2 colours
    Print time
    approx. 5 h

    from

    €24.50

    Indicative price. Final price, VAT not applicable. Your quote is exact.

The amounts are guide prices for the print. Design comes on top, listed separately. All rates are on the pricing page.

Own designs

Three of Yannic Fréson 3D's own designs, drawn from the first sketch onwards.

Questions about custom design

All frequently asked questions

What do you need from me to draw a part?

A sketch with the outside dimensions, the position and diameter of any holes, and what the part has to hold or fit onto, all in millimetres. A rough drawing on paper is fine, as long as the dimensions that matter are on it. Say too where the part goes and whether it has to carry anything.

How many hours of design should I allow for?

For a simple part such as a cap or a spacer, usually half an hour. Parts with snap fits, screw threads or several components take longer. The estimated number of quarter-hours is in your quote before you decide anything.

Can you modify an existing 3D model?

Yes. A STEP file is the handiest for that, because its dimensions stay editable. An STL is possible too, but small changes take longer there. Moving a hole or adding a name is usually fifteen minutes to half an hour.

Can you design a part from a rough sketch?

Yes, if the dimensions that matter are on it. A pencil drawing with the size of the space, the holes and the thickness is enough for a bracket or a holder. Faces, figurines and organic shapes are not drawn from a sketch; those are not on offer.

Describe what you need

Add a sketch with the main dimensions and write down what the part has to do. You get an estimate of the design work and the price of the print.

The request was not sent. Fill in your name, email and question, tick the agreement and try again.

Preferred colouroptional

Matte

Wood

Sheen and effect