Custom 3D printing, from idea to finished part
Yannic Fréson 3D is a 3D printing and design service for the Heist-op-den-Berg area, between Mechelen, Leuven and Antwerp in Belgium. Send your own file, or a sketch with dimensions for a new part, and get a print in PLA, PETG or ASA, in up to four colours. Orders are ready in 3 to 5 working days, then delivered or shipped.
- 0.2 mm
- layer height as standard. Fine enough that you barely feel it, coarse enough to finish this week.
- 4 colours
- in one object, in a single print. Nothing painted, nothing glued.
- 256 mm
- in every direction: the largest part that fits on the build plate in one go.
- 3 to 5
- working days from your approval to a finished print.
What you can have made
From a single part to a run of a hundred. Pick whatever is closest to what you need today; if you are not sure, describe it in a few words.

Print your file
You already have an STL, 3MF or STEP. It is printed and cleared of supports.
STL · 3MF · STEP

3D design on request
No file? A sketch with a few dimensions will do. A new part is drawn for you: a bracket, a holder, an adapter.
€60 per hour, per 15 minutes

Prototypes and small batches
Hold the thing that so far only existed on your screen, then order fifty of the version that works. For shape and fit only, an unfinished fast prototype is cheaper and ready in 1 to 2 working days.
up to about 100 small parts

Printing in several colours
Logos, name signs and designs where the colour is in the material, not on it.
up to 4 colours per object

A designer at the printer
A 3D printer does what it is asked. The difference lies in what you ask: which colour goes where, how the light falls on an edge, whether a seam sits at the front or the back. At Yannic Fréson 3D every print is looked at as a design first and as a file second. Even if it is only a clip. Especially if it is only a clip.
Own designs
Yannic Fréson 3D's own designs and made-to-measure parts.
What is on the shelf
- Ivory White11100
- Charcoal11101
- Ash Gray11102
- Terracotta11203
- Mandarin Orange11300
- Grass Green11500
- Latte Brown11800
- Dark Brown11801
- Dark Chocolate11802
- Black Walnut13107
- Rosewood13204
- Titan Gray13108
- Rose Gold13206
- Gold13405
- Velvet Eclipse13905
- Copper Brown Metallic13800
- Galaxy Purple13602
These colours are ready to go. Four of them can go into one object at a time. Any other colour or material is ordered for the job.
So what does it cost?
A 3D print from Yannic Fréson 3D costs at least €10 per order. The price depends on the weight, the print time, the material and the number of colours. Three examples, so you do not have to guess.
Keychain with a name
- Dimensions
- 60 × 25 × 4 mm
- Material
- Matte PLA, 2 colours
- Print time
- approx. 30 min
from
€10
Indicative price. Final price, VAT not applicable. Your quote is exact.
Phone stand
- Dimensions
- 90 × 80 × 110 mm
- Material
- Matte PLA, 1 colour
- Print time
- approx. 3 h
from
€14
Indicative price. Final price, VAT not applicable. Your quote is exact.
Two-colour name sign
- Dimensions
- 200 × 120 × 5 mm
- Material
- Matte PLA, 2 colours
- Print time
- approx. 5 h
from
€24.50
Indicative price. Final price, VAT not applicable. Your quote is exact.
Guide prices, shipping not included. You always get your exact price in a quote first. See all prices and how they are built up.
How it works
Send your file or your idea
An STL, 3MF or STEP, or simply a sketch with a few words of explanation. One on the back of a beer mat counts too.
You get a quote
With a fixed price, the recommended material and the date it will be ready.
Printing and finishing
Once you approve, the printer starts. Supports off, edges tidied.
It comes to you
Delivered to your door in the Heist-op-den-Berg area, or by parcel in Belgium and the EU.
Frequently asked questions
All frequently asked questionsI don't have a 3D file. Can I still get something printed?
Yes. A sketch with the dimensions that matter and a few words on what the part has to do is enough. A new 3D model is drawn for you at €60 per hour, billed per 15 minutes, and then printed. Read more about 3D design on request.
How quickly will my 3D print be ready?
An order is ready within 3 to 5 working days after you approve the quote. Large parts, batches and design work can take longer; if so, your quote says so. If you are in a hurry, ask about a rush print.
How does my 3D print get to me?
In Heist-op-den-Berg, Hulshout, Begijnendijk, Herselt and Tremelo your print is delivered to your door for €3, free from an order value of €25. In eight municipalities around them delivery is by arrangement. Everywhere else in Belgium, in the Netherlands and in the rest of the EU the order is shipped. Every option is on the page about delivery and shipping.
Do you print in metal or resin?
No. Yannic Fréson 3D prints plastics with FDM technology: PLA, PETG and ASA. Metal, resin and SLS nylon are not on offer. If you are not sure which material you need, see the overview of materials.
Request your quote
Drop your file on the build plate or describe what you need. You get a fixed price, with no obligation.



